Automatic dispensing machine pneumatic dispensing controller
The dispensing controller is a necessary part of the automatic dispensing machine. As the air pressure adjusting device of the machine dispensing machine, it is to be able to control the air pressure, so as to adjust the delivery and delivery of glue. It is very important for dispensing. It is very important to select the dispensing controller as a very large one. Some controllers have different air pressure and performance, so we need to select the appropriate control device.
There are three kinds of dispensing controllers used in the automatic dispensing machine, i.e. common dispensing controller, hot melt dispensing controller and special controller. They have different characteristics, and the use effect will be quite different. If the use situation is not clearly understood, some error values may appear, leading to deviation in production results.
General dispensing controller
Common dispensing controller is generally called 983a controller, which is divided into single hole and double hole. Single hole is generally used for dispensing syringe and double hole is used for dispensing valve. This controller can also be used as semi-automatic machine, with time adjustment and air pressure adjustment device, with 16 modes of adjustment, and can be used as semi-automatic dispensing machine, belonging to multi-functional control device.
Hot melt dispensing controller
This controller is different from the general control. There is a heating device built-in, which can be heated in the specified accessories. The controller also has a suction and air pressure adjustment device. There is no selection mode, it is only suitable for the use of the hot melt glue dispensing valve, with a small range of use, but it is relatively specified.
It refers to the device that can only control the air pressure. It can only be used for the automatic dispensing machine to control the air pressure. It can't do other functions. Its functionality is relatively simple. Many controls will match this control device, so as to avoid being too complex and inconvenient to debug the glue.
Each kind of dispensing controller has corresponding functions, which can be selected according to the manufacturer's demand or price.