Dispensing machine for cosmetic box
The dispenser of cosmetic box is able to dispense glue in the whole cosmetic industry, such as: cosmetic bottle cap, cosmetic box, powder box, packing box, cosmetic mirror, etc., which can be dispensed by machine. There may be several types of glue that can be used. You can rest assured that the dispenser can realize the corresponding glue exchange. These industry needs can be met.
The operation is very simple. It only takes half an hour to basically know how to operate the machine for dispensing. Because there is a mature operating system, no programming is needed, just input the dispensing data of the cosmetic case, determine the start point and the end point, and the machine can be used in infinite circulation. It is very convenient to replace the product. Only one more file number needs to be built, and the first program will not be disturbed. Next time, only To change the sequence, we can carry out product dispensing again. It is very convenient to use. The program designed each time can be used for a lifetime.
999 sets of procedures can be designed for one machine. In the cosmetics industry, all dispensing is still suitable for use. However, the fixture needs to be replaced. Since the fixture is the only one, the replacement of a product requires the replacement of a set of fixture. The price of the fixture is 800. Generally, the first set of fixture is free. In the glue type, please note that the use requirements of hot melt adhesive and yellow glue are different. There is one accessory Some differences, will use the same glue in a series of products.
Tablet dispensing, paper box dispensing and cosmetic box dispensing all use the same type of glue, hot-melt glue, which has good bonding effect, while glue is not liquid type. Dispensing in the paper box can be bonded without causing deformation of the paper box. Many paper boxes are glued with hot-melt glue, which can avoid poor rate during transportation. Dispensing at any time can promote a product.
Parameters of dispensing machine for cosmetic case
Machine type: hot melt glue applicator
Dispensing range: 300 * 300 * 100mm (customizable)
Application scope: cosmetic box dispensing, tablet dispensing, paper box dispensing, box dispensing, electronics, mobile phone case, automobile and other products requiring hot melt adhesive.
Gluing width: 0.1 ~ 15mm
Glue application line speed: 300 ~ 500mm / S
Gluing surface: three dimensional structural plane can be glued
This is the basic parameter of dispensing machine of our cosmetic box. If you have this demand, you can understand it! Chinese system automation equipment is a manufacturer with relatively high glue technology! The technology core has few patent certificates. Welcome to consult the manufacturer: 13662812001 (wechat same number)