LED lamp bonding
The glue used for the bonding of LED lamps is silica gel. Apply a layer of glue around it to make it have a sealing effect and prevent water vapor or gas from entering into the lamps, so as not to cause short lamp life. In the past, the way of manual dispensing was generally used. Now we have developed a fully automatic silica gel dispenser for lamp bonding.
Taking three-axis as the mechanical structure, desktop platform, fixture fixture, mechanical axis to control the dispensing track, and using dispensing valve, controller and control system to control the dispensing amount, so as to realize the automatic dispensing function, solve the problem of manual complex dispensing procedure and inaccurate control of dispensing amount, and solve the problem of slow and inaccurate dispensing speed.
The production speed of silica gel dispenser can reach 500mm / s, the glue width is within 0.1mm, the glue output speed is 1s / 5G, the glue quantity is controlled stably, the glue quantity at the beginning and the end can be controlled, the glue does not overflow, the glue coating is beautiful, the appearance and speed meet the production requirements, meet the market demand, a large number of lamps are bonded, and the silica gel dispenser produced by our company can be used.
The bonding of lamps can prevent the corrosion of glue. Some metals are easy to be corroded in use, especially oxidized, with shorter service life. After gluing, they can be covered on the oxidized metals to protect the base metal of LED lamps from oxidation, ensure the safety of use and avoid short circuit or fire.
The main purpose of lamp bonding is to bond the mask with the lamp holder. The adhesive has strong sealing property, low cost, resistance and falling resistance. It can add points to the appearance, but it does not reduce the functionality. The LED lamp has a longer service life and is more likely to be liked by customers. The dispensing effect of the silicone dispenser is so good